SeaDoo Spark Forum banner

1 - 16 of 16 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter #5
well, what you see is what you get currently.
for a basic tune, the ecu is very simple (comparatively speaking of course). there are a few im still unsure about their purpose. some type of limiter, but for what?
i have updated the map pack a bit since taking that picture.

anyone know of any type of data logging software for these things?
 

·
Registered
Joined
·
25 Posts
Discussion Starter #9 (Edited)
got a test tuned flash tonight as well. :)

edit: ecu ori files: http://goo.gl/AQDYch

Application number:103 BL IROM
Checksumm AUTO
-- Identification ECU
Connect to ECU...
Connected OK
PROCON0: 000087FF
Read protection and global write protection is installed.
PROCON1: 00000000
Memory configuration
Sector Address Size OTP User0 WP User1 WP
00 0xA0000000 0x00004000 RW WP No WP
01 0xA0004000 0x00004000 RW WP No WP
02 0xA0008000 0x00004000 RW WP No WP
03 0xA000C000 0x00004000 RW WP No WP
04 0xA0010000 0x00004000 RW WP No WP
05 0xA0014000 0x00004000 RW WP No WP
06 0xA0018000 0x00004000 RW WP No WP
07 0xA001C000 0x00004000 RW WP No WP
08 0xA0020000 0x00020000 RW WP No WP
09 0xA0040000 0x00040000 RW WP No WP
10 0xA0080000 0x00080000 RW WP No WP
11 0xA0100000 0x00078000 RW No WP No WP
Detected TC1766 processor
Checking tprot version number...
Detected TPROT 5-7
Finished OK
--
Loaded file: C:/Users/k0mpresd/Desktop/SeaDoo Spark 60HP ME17.8.5/WinOLS (SeaDoo Spark 60hp (Stage 1 8350rpm ) - 544876).bin
File load OK
Checksum calculation, please wait...
Checksum updated
Finished OK
--
Write data
Skip sector A0000000 - CRC OK
Skip sector A0004000 - CRC OK
Skip sector A0008000 - CRC OK
Skip sector A000C000 - CRC OK
Skip sector A0010000 - CRC OK
Skip sector A0014000 - CRC OK
Skip sector A0018000 - CRC OK
Skip sector A001C000 - CRC OK
Erase sector A0020000...
Write sector A0020000...
Skip sector A0040000 - CRC OK
Skip sector A0080000 - CRC OK
Skip sector A0100000 - CRC OK
Write 131072 bytes
Write file in 1 minutes and 1 seconds
Finished OK
 

·
Registered
Joined
·
2 Posts
im new to all this....do you have a way of tuning a 60hp to 100+ without spending all that money on v-tech programmer and licences?
thanks.
 

·
Registered
Joined
·
1,027 Posts
IMO tune is the best thing to do and even better when you work on the air intake and use it in collaboration with other mods.
 

·
Registered
Joined
·
2 Posts
...willing to post your "WinOLS (Sea-Doo Spark (Original) - 544876).ols" ?
We could learn a lot from the map settings, because the sparks are not the only seadoos with a MED17.8.5 ECU.

Thanx in advance
 

·
Registered
Joined
·
1 Posts
You can change the variant coding in the EEPROM file that u can read with any tool that does ME17 eucs, essentially there very few changes to make the 90 HP unlock happen, if you want message me and i will do it VERY cheap for you, a sneak peak under the hood guys charging any more then 100 dollars for this are crooks i post this because Kompressed wanted to charge me $500 i almost fell out of my seat and said nah people deserve this for free
 

·
Registered
Joined
·
1 Posts
Hi Kompressed ... The link is too old, could you please share it again ?
thanks.
If not please share what info you can for the maps that you have found.
I ask this because we are a lot of people using the same ecu on atv's, ssv's and so on.
By finding how to remove speed limitations and find out some improvements for the response we could benefit a lot of users that would ultimately help others as well.

Thanks.
 
1 - 16 of 16 Posts
Top