SeaDoo Spark Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
hi everyone, really hoping some memberscould help me out, im trying to get a trailer ready for collecting my spark at the end of feb. I need to know how you have your trailer bunks please, height of bunks above axle and measurement between bunk inside edges please, really want the spark sitting as low as possible on the trailer, the trailer frame is a flat one with out curved cross members, any advice and pictures would be great
 

·
Registered
Joined
·
125 Posts
18" space from bottom inside bunk rails. Jus under 25" top outside to to outside bunk. 22.5" center to center bunk bracket. Hull hangs down 1.5" below lowest part of bunk. Bunks are angled in at the center about 35 degrees (didnt measure). I took tools with me but the dealer made the adjustments for me.
 
1 - 3 of 3 Posts
Top