SeaDoo Spark Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Has anyone used the 2qt oil change kit for their spark? I have seen many reviewers say that their spark took more than 2 quarts. I have also heard that the 2 quarts is an estimated based on how much of the old oil you can get out. Obviously flooding the engine would get more out but should I just drain it cold and then refill with the 2 quarts to leave some of the old in their?
 

·
Registered
Joined
·
3 Posts
It’s very time consuming to get all the old oil out. Due to air. You don’t want to mix new with old or flooding it. It will contaminate your new oil. And be a waste. Just get as much out as you can and refill it. Also change the filter. Old oil will stay in some passages but thts ok. I also run Lucas in it to top it off. Oil stabilizer. It helps for dry starts so much. N will coat your bearings and they will nvr be dry. I have about 165 hours on mine. She runs like new every time.
 
1 - 2 of 2 Posts
Top