SeaDoo Spark Forum banner
1 - 20 of 30 Posts

·
Registered
Joined
·
196 Posts
you need:

"rotax extreme"
"dongle"
"brp 6 pin > obd2 adapter"
purchase here: http://bitbox.ru/en/howbuy

tactrix openport
purchase here: http://goo.gl/3zpvf4

this will allow a VR (virtual read) of ecu and flash of ecu with tuned file from a tuner.

have fun. :)
for this route isnt it preferablly to get the tune and do what you need to do? because you will still need to purchase a key
 

·
Registered
Joined
·
22 Posts
you need:

"rotax extreme"
"dongle"
"brp 6 pin > obd2 adapter"
purchase here: http://bitbox.ru/en/howbuy

tactrix openport
purchase here: http://goo.gl/3zpvf4

this will allow a VR (virtual read) of ecu and flash of ecu with tuned file from a tuner.

have fun. :)

Have you tuned a spark this way? What program did you use to change mapping, a/f ratio, rev limiter etc? Not sure how many people on this forum are capable of tuning this way and need "pre-made" tunes.
 

·
Registered
Joined
·
322 Posts
How about a step by step video on what your refering to ? Maybe some pics ? Is there a file download site? An instructions manual? Forums for this type of software? I write my own dyno maps for the EFI systems on my 4 wheelers and would love a better option than Vtechs garbage.
 

·
Registered
Joined
·
25 Posts
Discussion Starter · #12 ·
if you are a "dyno tuner" i would assume your skill level already much surpasses the skill required it takes to sort how to plug a tool to the diag port and click the "flash" button.

if you need a support video on how to tune, you may want to reconsider attempting all this yourself.
 

·
Registered
Joined
·
322 Posts
Just looking for the basic information of what this software is all about . I use Optimums GP control stuff on the Sagem MC1000 ecu's and the dynojet piggyback units. I use procal and map editor to change fueling and ignition tables. Would this be a similar to what Im used to using? Yes I know its old school.
 

·
Registered
Joined
·
25 Posts
Discussion Starter · #15 ·
seadoo spark ecu bench harness.


can be fitted with obd2 connector instead or as shown with brp>obd2 adapter.


can be used to flash spark ecu on bench with proper tool (as shown in picture) or very useful for candboo/BUDS tool access outside of ski as well.








 

·
Registered
Joined
·
196 Posts
seadoo spark ecu bench harness.


can be fitted with obd2 connector instead or as shown with brp>obd2 adapter.


can be used to flash spark ecu on bench with proper tool (as shown in picture) or very useful for candboo/BUDS tool access outside of ski as well.
I would definitely like this setup but just to clear codes and not for vtech tune, but good to know
 

·
Registered
Joined
·
22 Posts
I would definitely like this setup but just to clear codes and not for vtech tune, but good to know
Im not sure why you mention vtech??? This has NOTHING to do with vtech..... This method is for tuners that know what they are doing. This is not your average spark users tool and should only be used by people that have proper tuning equipment and software.
 

·
Registered
Joined
·
19 Posts
you need:

"rotax extreme"
"dongle"
"brp 6 pin > obd2 adapter"
purchase here: http://bitbox.ru/en/howbuy

tactrix openport
purchase here: http://goo.gl/3zpvf4

this will allow a VR (virtual read) of ecu and flash of ecu with tuned file from a tuner.

have fun. :)

While I appreciate your effort in trying to provide something to those in the community for free. You may want to re-name the thread to Custom Flash for Spark ECU, instead of How to. Normally how to's are broken into several steps with instructions on how to achieve the overall goal.

Might clear up the confusion.
 
1 - 20 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top