SeaDoo Spark Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi All, need to remove fishing line from inside intake grate. I have the top off the Spark and have removed the 3 nut and bolts. Is there another nut to remove as the grate will not budge. Thanks
 

·
Registered
Joined
·
45 Posts
You forgot 2 screws....

they are located at the back of the jet ski, under the jet pump...the very two bottom screws....you'll need to remove the nozzle and "maybe" the pump housing to get to them....they are the two very tiny silver screws...you can see them if you look close... :)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top