SeaDoo Spark Forum banner

Lock nuts and top ...

1927 Views 2 Replies 3 Participants Last post by  ChuckTheVoice
Doe's anyone know the thread count for the lock nuts that are used throughout the Spark (there are 10 that are used to keep the top on, 5 down each side)?

Part number: 232561200. http://www.seadoopartsnation.com/oemparts/p/sea_doo/232561200/elastic-stop-nut-m6-brassElastic Stop Nut M6, Brass.

Sea Doo sells them at $3.20 US each, plus tax. Most of their instructions call for replacing them after you take them off. So, it would be nice to find a cheaper place to buy them.

Does anyone reuse the lock nuts?
1 - 3 of 3 Posts
Doe's anyone know the thread count for the lock nuts that are used throughout the Spark (there are 10 that are used to keep the top on, 5 down each side)?

Part number: 232561200. http://www.seadoopartsnation.com/oemparts/p/sea_doo/232561200/elastic-stop-nut-m6-brassElastic Stop Nut M6, Brass.

Sea Doo sells them at $3.20 US each, plus tax. Most of their instructions call for replacing them after you take them off. So, it would be nice to find a cheaper place to buy them.

Does anyone reuse the lock nuts?
You can reuse them, they just might be a bit weaker than the first time they were used... $3.20 for a little nut is insanity!
You can put blue lock tight.

Sent from my SGH-I337M using Tapatalk
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top