SeaDoo Spark Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter #1
Doing my first oil change with top off. When I did it with top on, I drained the sump, pulled the filter. Cranked the motor, drained the filter housing. Repeat, til empty.

now with the top off....the oil is cold. And I won’t be able to crank the motor to remove all the oil. Big deal? Advice?
 

·
Registered
Joined
·
20 Posts
unless the top is already off, i would turn it on and run it for 5 mins (with water hooked up) to let the oil warm up. that's how i've done it.

if the top is already off, i'm not sure. try pulling it out cold i suppose, it just might take a bit longer
 
1 - 2 of 2 Posts
Top