SeaDoo Spark Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 · (Edited)
Does any one has also the following ?
The paint of my IBR System is peeling of.
I left my spark on holiday for 12 days in salt water and after this I noticed that on some place on the IBR system the paint is peeling of. The material under the paint is like the Jet nozzle so I don't think it can rust.

I would like to include a Pic of it but a get an upload error when trying to upload the 80kb Jpg file ?
 

·
Registered
Joined
·
81 Posts
Hi, i had the same problem on my 2014 with iBR, 12 days is a long time.
Mine was in the water for 3 days and the same happened. My Spanish dealer changed it for free and the new one has been good to me :)

So i guess its guarantee. Atleast mine got changed out. (the ski had 5 hours on it when it happened)
 

·
Registered
Joined
·
115 Posts
You should not leave it in the water for 12 days... Especially not in salt water. Get a trailer or floating dock and flush after each ride, or you will loose performance and reliability...


Sent from my iPhone using Tapatalk
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top