SeaDoo Spark Forum banner

Plastic hull anomalies.

3423 Views 7 Replies 6 Participants Last post by  BTMG
Now that I got my spark off the trailer I noticed this. Where the plastic swirled around in the mold there seems to be what looks like cracks . I didnt notice them before because they were hidden by the bunks. I filled the hull with halfway with water and no leaks appeared. I might just send these to my dealer just for future reference to log the data. Im just going to ride it as usual. They are in the middle of the machine at the lower edge.

Attachments

See less See more
3
1 - 8 of 8 Posts
Just above the bunk. And they are most certainly not scratches as they follow the grain of the plastic.

Attachments

See less See more
Now that I got my spark off the trailer I noticed this. Where the plastic swirled around in the mold there seems to be what looks like cracks . I didnt notice them before because they were hidden by the bunks. I filled the hull with halfway with water and no leaks appeared. I might just send these to my dealer just for future reference to log the data. Im just going to ride it as usual. They are in the middle of the machine at the lower edge.
DEFINATELY send to the dealer AND have him inspect and document the cracks as well (get a copy)...:crying:
I have the same patterns on mine except for the crack.. they are all over the place they came that way from dealer
I have the same patterns on mine except for the crack.. they are all over the place they came that way from dealer
I also have the swirls all over the bottom of my ski. Didn't see and cracks tho
It may be just the 10 percent fiberglass plastered in with it from what I hear its not 100 percent polypropylene
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top