SeaDoo Spark Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
22 Posts
what needs to be done different to a jet ski that is in salt water versus fresh water maintenance.
Take the deck off. Its easy. Spray everything with silcone. Inside and pump. Wash it down with fresh water inside every time you use it. You can mist a bit in the engine hatch every few rides. You want to keep everything inside slightly wet looking with silcone. Make sure you cover the footwells with a rag. Even a small bit of silicone overspray will make them slippery.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top