SeaDoo Spark Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
29 Posts
The depth finder is located on the left (port) aft (stern) side. You have to take the top off to get to it. You will see two "towers" about an inch or two high. That is where the stock depth finder goes. I would imagine that would be the best place, or area, for your transducer assuming its a shoot through the hull type (no water temp though). You could probably epoxy it in.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top