SeaDoo Spark Forum banner

Seadoo spark side protector adhesive

2217 Views 2 Replies 3 Participants Last post by  madmanjf
hello,

on my first ride my side protector came off half way and i was able to go back to the marine and keep it in place.

I know that other owners had the same issue and i just wanted to know if anyone has a good solution. is 3m marine double site tape a good solution (vhb tape) however i think it will cause damage to the body if you try and remove it.

any advice will do... hoping to have this fixed before the weekend so I can ride.
1 - 3 of 3 Posts
Mine have been great. All I did was alcohol whip the side, let it dry. Spray on adhesion promoter, wait 7 minutes. Stick on protectors. Than drill and install the push pins.


Sent from my iPhone using Tapatalk
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top