SeaDoo Spark Forum banner

What do you think guys?

"teaser video" Grimlin . GFF

13547 Views 42 Replies 13 Participants Last post by  SparkieCrush
Here's a short video . sound is crappy...getting go pro hopefully tomarrow and upload it .lmk what you guys think.. thx for the
Continued support !!! means alot guys..

http://youtu.be/F5vi8IjpWhA
  • Like
Reactions: 1
1 - 20 of 43 Posts
Nothing will give you the same sound as in person so people just need to remember in person it's gana double in sound and quality.
  • Like
Reactions: 2
it wasnt that loud at all but does have a nice tone and the whole motor open couldnt get a real good sound going to tak another go tomarrow with the go pro . ill post it
  • Like
Reactions: 1
  • Like
Reactions: 1
I think I'd be interested in getting one this fall.
  • Like
Reactions: 1
ok here is video #2 still have to get to the water . but is sounds nice and if you do the water box later im sure it will be louder ..lol

http://youtu.be/1Tft0UDB8mM
  • Like
Reactions: 1
The pipe touching the plastic hull will not get any hotter then it is in the video? If u don't mind me asking wht is it made of?
No I just set it there . when its back together it wont be touching anything. Just there for demo purposes.
Does thsi give you any performance boost, or is it just for the sound?
Both . Performance and sound
I Like the sound If it adds performance.
Is it similar to the big aftermarket companies but at a economy level?
Can you take that back part off without taking the top off.
Hoping for the Best for all you efforts!~
Yes, it does add performance looking at the range of 1 to 2 mph and around 3 to 4 HP. You can take the back piece of without having to take off the whole cover but I would recomend it . Id take to hold cover of just so you have the room to work. And yes these are like the big aftermarket companies but just more cost efficient for the average person. That was one of the reasons why I took this project on is to make an affordable aftermarket products for everyone to enjoy
  • Like
Reactions: 2
Sorry but i find it hard to think that you will gain any performance with this. The silencer (plastic box) must then be the restricting part in the link, which i don't think it is. But i've heard that you could get a better flow if you remove whats inside the waterbox (or go with the Riva one)... To gain RPMs to get higher speeds you'll have to remap the engine. Hmm, but for the sound - it's still probably worth it. Still i appreciate your work! :)
Well I guess Ill find out wont I just hard that other aftermarket companies are making the similar thing claiming gains in performance and rpms which will give you mph . All things from factory have restrictive things on all there cars , trucks, motorcycle, even ski's . So how is it that making it flow and adding more air is not going to give it any more performance!? Im not understanding u .
  • Like
Reactions: 2
Well, the boost form 90 to 109 HP barely gives 1-2 MPH increase, how much is the boost of 3-4 HP really gonna do?

I'm also skeptical of real performance boost. I look forward to some published numbers.
Of course ur skeptical cause no one out there is doing the R&D that im taking my own time and money to do what big company's cant even do plus half of what they charge. So it easy to read what they say and u believe them cause there a company . When I put ski to ski to show gains they just tell u . And u cant believe everything u read.
I assure u all ut answers will be answered soon .very soon
ok here is video #2 still have to get to the water . but is sounds nice and if you do the water box later im sure it will be louder ..lol

http://youtu.be/1Tft0UDB8mM
Sounds super bad ass!!!!!! :D
  • Like
Reactions: 1
Just send me mine. Freeing up that exhaust has to help and even if the performance isn't that much.....that better (sweet) sound will make me faster.:D
  • Like
Reactions: 1
1 - 20 of 43 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top