SeaDoo Spark Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
In my bailer hose that runs from the bailer pick-up assembly to the 90 deg elbow, there appears to be something inside the hose right where it connects to the elbow. I haven't taken it apart to get a better look so I am only observing it through the somewhat transparent hose. I can't makout what it is so my first thought was its a clog of debris. The pick-up assembly seems to have a small grate to avoid large debris clogging, but the "debris" I see could be larger than should fit through the grate (its hard to tell). Could this "debris" actually be some kind of filter? I don't see mention of a filter in drawings.

Thanks for your help.
 
1 - 2 of 2 Posts
Top