SeaDoo Spark Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
227 Posts
Discussion Starter #1
Normally when the Spark is shut down the IBr remains in the down position. I looked once and saw the gate was up. I'm not sure why. If you could force the up position , could you then replace the ware ring without removing the Ibr ?
It would also be better in up position for inspection and cleaning.
 

·
Registered
Joined
·
184 Posts
Normally when the Spark is shut down the IBr remains in the down position. I looked once and saw the gate was up. I'm not sure why. If you could force the up position , could you then replace the ware ring without removing the Ibr ?
It would also be better in up position for inspection and cleaning.
True. I know with my 2011 RXT 260, you could raise/lower the iBR gate with the VTS buttons. I wonder if they could put something in the programming to raise the iBR gate like we switch from touring to sport mode.

Hit mode button till iBR shows on the screen, hold mode button and iBR gate will rise. Next time ski is awakened, iBR goes back to normal.

I bet something like that will be implemented in the future with an software update.

Yep, my phone sent this...
 

·
Registered
Joined
·
227 Posts
Discussion Starter #3
I'm wondering if I hit the lever when I shut it down and that changed the position.
 

·
Registered
Joined
·
227 Posts
Discussion Starter #6
This is the kind of question that Sea a Doo tech dept .ought to be able to answer but
If a customer calls, they will not respond even by email.when I've asked things like this before the answer has been contact your authorized dealer.
 
1 - 6 of 6 Posts
Top